点击图片查看原图
双螺杆挤出机芯轴
尺寸范围：直径10-120MM/长度500-9000MM
材料：正常情况下选用40CrNiMo，经过特殊处理，采用渐开线形式，在扭矩，扭力，负荷的情况下，可以采用具有良好任性和机械性能的WR15E和WR30材料，其性能参数与进口芯轴等同，但性价比远于进口类产品。在加工过程中严格控制准确度，保证芯轴的加工尺寸。
Size:diameteter 10-120mm/length500-9000mm
Material;
(1) 40CrNiMo with special treatment and involute form can be used cicumstances of high torque, high torsion and high load.
(2) And nitrogen bearing Martensite stainless steel,WR15EandWR30 can aiso be spplide to make good toughness and machine performance available.The performance similar to the imported shaft but with more cost efficient,the machining process is under accurate controlling to make sure the accurscy of groove depth and distance,the smoothness of the surface,toughness and durability as well.
芯轴材料介绍/Material Introduction
Rally WR15E是一种强度合金工具钢。其性能特点如下：
-优良的机械强度，韧性和刚性;
-优良的抗热疲劳;抗冲击性能;
-良好的温强度;
-各项性能等向性的特点：
良好的机械加工和抛光性能;
-优良的淬透性;
-热处理过程中良好的尺寸稳定性。
Rally WR15E is a chromium-molybedenum-vanadium-alloyed steel
Which is characterized by;
-Excellent tensile strength combined with good toughness
-High themal stability,high tesistant to thermal shocks
-Good high-temperature strength
-Good machinability and polishablility
-Excellent through-hardenjing properties
-Good dimensional stability during hardening
双螺杆挤出机芯轴
http://www.njsljcj.com/ParentList-1537735.html
https://www.chem17.com/st359310/list_1537735.html